Sakai SW884, Руководство оператора

Страница: 59 / 127

2 OPERATION
– 54 – – 55 –
2.3.6 AUTO SPEED
2.3.6.1 Setting
The machine propel speed can be memorized by the machine controller and the speed is
controlled automatically. It will help to easily control your speed to a preset value when a
certain speed is required on the work site.
NOTE: • The AUTO SPEED function only operates when the Engine speed selector switch is
set to ECO or FULL and the Travel mode selector switch is in the position.
• The minimum allowable AUTO SPEED setting is 1.5 miles per hour.
1) With the machine moving at the desired AUTO SPEED,
press the top button on the F-N-R lever and hold for at
least one second to set the AUTO SPEED equal to the
current machine speed.
2) Check the AUTO SPEED lamp
If the AUTO SPEED is successfully set up in Step 1,
the AUTO SPEED lamp will remain lit. If the lamp is not
illuminated, repeat Step 1.
3) After setting the AUTO SPEED in Step 1, move the
F-N-R lever to the neutral position
Ⓝ
.
The AUTO SPEED feature is now set so that the
machine will travel at the preset speed when the F-N-R
lever is in the full forward or full reverse position.
CAUTION
Do not change the IPF / Vibration Frequency / Vibration Amplitude / Travel Mode /
Engine Speed switch setting after setting the AUTO SPEED without first canceling
the AUTO SPEED. Doing this will cause the AUTO SPEED lamp to flicker until
the IPF / Vibration Frequency / Vibration Amplitude / Travel Mode / Engine Speed
switch is set back to the position it was in when AUTO SPEED was set.
AUTO SPEED
Ⓝ
Neutral
Ⓡ
Ⓕ
Reverse
Forward