Sakai CR271, Руководство по ремонту

Страница: 131 / 170

9-005
INSPECTION AND ADJUSTMENT
3-2. Inspection
• If measurement results indicate the pressure deviating
from standard charge relief valve setting range, make an
inspection in accordance with procedure described below.
①
Remove plug and charge pressure relief valve (1-9).
②
Check removed charge relief valve for trapped dirt and
other abnormalities.
③
If trapped dirt is present, disassemble and clean charge
pressure relief valve.
④
If pressure still deviates from standard charge relief valve
setting range after valve is disassembled and cleaned,
replace charge pressure relief valve.
⑤
After inspection, measure pressure again and check that
pressure reaches standard charge relief valve setting
range.
N•m
Plug : 78 N·m (57.5 lbf·ft)
(NOTICE)
• Carefully disassemble and reassemble after taking
steps to prevent foreign material from getting in.
CR271-09004
1-9