Sailor 250 FleetBroadband, Руководство пользователя, Страница: 164 / 288

Chapter 4: Using the web interface
148 Managing LAN network users
3. Type in a name for the group.
4. Select Enabled or Disabled .
5. Select the type of Internet connection .
• Router mode means the connection will be shared with other users,
and the NAT module of the terminal will make the necessary address
translations. Use this mode if one or more computers are connected
using the LAN interface, and the terminal should act as a router.
• Bridge mode is an exclusive connection, with NAT disabled. Use this
mode together with a network classification entry that selects a single
computer (see
Using the network classification table on page 153). This
mode is not available in the Default network user group.
• No Internet access means no connection to the Internet is allowed. Use
this setting e.g. for IP handsets, where an Internet connection is not
required. The external voice connection is still available; this setting
only affects communication over the Internet.
6. Select Dynamic IP address .
This is the IP address used externally on the satellite network. Refer to
next step for Static IP.
7. If you want to use a static IP address , you must have the static IP address
included in your airtime subscription and use that address as follows:
• Leave the setting in step 6 at Dynamic, do not select Static IP .
• Select SIM default in step 9
• Type in the APN user name and password from your provider in step 10
Your terminal will then use the static IP address set up for your SIM card.
8. Set IP Header compression to Enabled or Disabled .
For information on IP Header compression, see Header compression on
page 157.
9. Select the source of the APN (Access Point Name).
Note
Static IP is handled by the service provider. Do not type in a static
IP address in the Static IP address field; a manually typed IP
address will currently not be used by the network.