Sailor 250 FleetBroadband, Руководство пользователя, Страница: 123 / 288

Chapter 4: Using the web interface
Setting up the interfaces 107
4444
Usin
g the web in
te
rf
ac
e
Enabling or disabling the L-Band interface
The L-Band interface is used for connecting a broadband receiver for
reception of position data. To enable or disable the L-Band interface, do as
follows:
1. In the L-BAND CONNECTOR field of the SETTINGS page, select Enable or
Disable .
2. Click Apply .
Configuring the LAN interface
Overview
The SAILOR FleetBroadband terminal has 4 LAN connectors with PoE (Power
over Ethernet).
The major part of the LAN parameters are set up in the network management
pages, which require administrator password. For information on these
settings, refer to
Managing LAN network users on page 143.
Setting up the local LAN IP addresses
In the web interface you can set up the IP addressing between the terminal
and devices connected to the terminal. The terminal has a built-in DHCP
server which can be used to dynamically assign IP addresses to devices
connected to the terminal.
Caution! All connections to the LAN interface may be affected when
you change the settings below. This also includes your own
current connection.