Sailor 250 FleetBroadband Скачать руководство пользователя страница 100

Страница: 100 / 288

Chapter 4: Using the web interface

Introduction

Icons in the icon bar

The following icons may appear in the icon bar in the web interface:

Navigating the web interface

•

To expand a menu

, click the menu in the navigation pane.

•

To access status and settings

, click the relevant subject in the navigation

pane or click the relevant icon in the icon bar. The status or settings are
displayed in the contents section.

•

To see the site map

, click

SITE MAP

in the navigation pane. The site map

lists all topics and submenus. Click on items in the site map to go directly
to the relevant location.

Icon

Explanation

A new SMS message, or information of Voice mail, has arrived.

Click the icon to see new messages or information of Voice mail.
For further information, see

Receiving a message

on page 102.

An event is active.

Click the icon to see a list of active events. For explanations of the
event messages, see

List of events

on page 224.

Note that this icon will remain in the icon bar as long as the
event is still active.

Содержание 250 FleetBroadband

































































































































































































































































































Результаты поиска

Содержание 250 FleetBroadband

Отзывы:

Sailor 250 FleetBroadband, Руководство пользователя, Страница: 100 / 288

Результаты поиска

Содержание 250 FleetBroadband

Отзывы: