Networks · Setting Up a Wireless Network (WLAN) Manually
55
EN
You can find the network name (Service Set ID) in
the network settings of your computer. The SSID
must match the SSID on the computer or on the
access point (Access Point, Router).
3. Confirm with
OK
.
4. Select an encryption standard or switch off net-
work security using
[
5. Confirm with
OK
.
6. Enter the password for the network.
7. Confirm with
OK
.
With the connection mode, you set the IP address
and subnet mask. If you have a DHCP or BOOTP
server in your network which dynamically assign
IP addresses, you can assign the settings auto-
matically.
8. Select automatic or manual configuration using
[
.
9. Confirm with
OK
.
10.
Manual Configuration:
Enter the IP address (for
example 192.168.001.×××).
11. Confirm with
OK
.
12.
Manual Configuration:
Enter the subnet mask
(for example 255.255.255.000).
13. Confirm with
OK
.
Modifying Wireless
Network Settings
Entering the Network Name
(SSID)
Introduction
You can find the network name (Service Set ID) in the
network settings of your computer. The SSID must
match the SSID on the computer or on the access
point (Access Point, Router).
1. Press
OK
,
0821
and
OK
.
2. Entering the SSID.
3. Confirm with
OK
.
Setting Network Security
Unprotected Wireless Networks are Accessible to Others!
1. Press
OK
,
0822
and
OK
.
2. Select an encryption standard or switch off net-
work security using
[
3. Confirm with
OK
.
4. Enter the password for the network.
5. Confirm with
OK
.
CAUTION!
Unprotected Wireless Networks are
Accessible to Others!
Unprotected Wireless Networks are Ac-
cessible to Others! Always protect your
network against unauthorised access.
You can toggle between different en-
cryption standards.
WEP Key
With 64-bit encryption, the WEP key must
be either 5 characters (ASCII) or 10 num-
bers (hexadecimal). With 128-bit encryp-
tion, the WEP key must be either 13
characters (ASCII) or 26 numbers (hexa-
decimal). You can find the WEP key in the
network settings of your PC.
WPA Key
Enter an 8 to 63 character long password.
The password can contain alphanumerical
characters—numbers and letters—and any
other symbol available on the keypad. The
only invalid character is "€” (the euro cur-
rency symbol).
This Process May Take a Few Moments.
The automatic configuration of IP address
and subnet mask on the connected net-
work PCs may take a moment.
IP-Address
The first three blocks of numbers refer to
the IP field; this information must match
the IP address on your computer. The last
three digits determine are the individual
IP address of the device. You can enter any
number between 000 and 255. However,
this number must be unique within the
network; it may not be used on any other
PC or network component.
Subnet Mask
In a network with a gateway or router, the
subnet mask indicates whether the re-
spective data packets are addressed to an
internal recipient in the network or
whether they should be sent to a recipient
outside of the network.
CAUTION!
Unprotected Wireless Networks are
Accessible to Others!
Unprotected Wireless Networks are Acces-
sible to Others! Always protect your net-
work against unauthorised access. You can
toggle between different encryption stand-
ards.
WEP Key
With 64-bit encryption, the WEP key must
be either 5 characters (ASCII) or 10 num-
bers (hexadecimal). With 128-bit encryp-
tion, the WEP key must be either 13
characters (ASCII) or 26 numbers (hexa-
decimal). You can find the WEP key in the
network settings of your PC.
WPA Key
Enter an 8 to 63 character long password.
The password can contain alphanumerical
characters—numbers and letters—and any
other symbol available on the keypad. The
only invalid character is "€” (the euro cur-
rency symbol).
Содержание MF 4591
Страница 1: ...MF 4591 User Manual...