32
Sagemcom · MF 4591
EN
3. Set the desired resolution. You can choose be-
tween:
DEFAULT
(for documents without special
features),
FINE
(for documents with small print
or drawings),
SFINE
(for documents with many
details) and
PHOTO
(for photos). Press
f
. The
configured resolution appears on the display.
Press
f
again to change the resolution.
Dialling a Number
· Dialling a Number
Dialling a Number
Dial the desired number. There are several ways to do
this:
Manual Dialling:
Dial the desired number using the
numeric keypad.
Telephone Book
Telephone book register:
with the keys (
A—Z
) you
can access entries saved in the telephone book. Enter
the initial letters or the name of the desired entry.
Your device will show you the telephone book entries
for the corresponding letters. Select an entry using
[
.
Using the Telephone Book
Redial / caller list
Redial / caller list:
The redial / caller list contains
the last numbers dialled and the last calls received (
©
indicates the numbers dialled,
®
the calls received
and
*
the calls missed).
1. Press
@
.
2. Select an entry using
[
.
Getting Outside Line
· Getting Outside Line
PABX Systems
Private branch exchanges (PABX) are typical in many
offices and some households. You must dial an out-
side line access code in order to get a connection to
the public telephone network (PSTN) from a PABX.
Inserting Outside Line Access Code
Enter the outside line access code with which you
reach the public telephone network before you enter
the desired number or select a stored entry. The out-
side line access code is usually
0
.
Incorrect Outside Line Access Code
Setting Up an Extension
Sending Fax Later
(= Timer Function)
· Sending Fax Later (= Timer Function)
Using fax transmission from the memory
This function is only available if you have set up your
device in such a way that fax messages are sent from
the memory (see also chapter
Set Fax Transmission
from the Memory
, page 63).
Sending Fax Later
If you would like to make use of the lower telephone
tariffs or if the recipient can be reached at some spe-
cific time only, you can send the fax at a later time—
within 24 hours.
1. Insert the document.
2. Enter the desired number using the numeric key-
pad or select a saved entry.
3. Confirm with
OK
.
4. Enter the time, at which the document should be
transmitted, e.g.
1400
for 2 pm.
5. Confirm with
OK
.
6. Select the desired resolution using
[
:
DEFAULT
—For documents without special fea-
tures
FINE
—For texts with small print or drawings
SFINE
—For documents with many details
PHOTO
—For photos
7. Confirm with
OK
.
8. Set the desired contrast using
[
.
-
/
1
—Reduces the contrast / typeface appears
lighter
4
(Factory settings)—Optimized adaptation for
all documents
+
/
7
—Increases the contrast / typeface appears
darker (for example, documents with faint print)
9. Confirm with
OK
.
10. After a short warm up phase, the device will read
the document into the memory and will send out
the fax at the specified time.
Set Resolution
You can select the default resolution set-
ting (see also chapter
Set Resolution
, page
60).
Using the Telephone Book
You can also call the telephone book entries
by pressing
am
and select
[
using
BROWSE
.
The function Search works even while you are
conversing on the telephone.
If you are loading entries from the telephone
book, it is possible to edit the numbers after
you have loaded them. For example, you can
add or delete prefixed numbers or direct dial
numbers.
Incorrect Outside Line Access Code
In rare cases, the outside line access code
may be a different number or a two-digit
number. For older telephone systems, the
outside line access code can be R (= Flash).
Press
Rø
to enter this outside line access
code. If the connection to the public tele-
phone network is not possible, contact your
telephone system supplier.
Connection to Private Automatic Branch
Exchange
If you operate your device permanently on an
extension, save the outside line access code
(see also chapter
Set up Private Branch Ex-
change (PABX)
, page 67).
Deleting a Job
To cancel a scheduled fax transmission,
simply delete the document from the jobs
list (see also chapter
Jobs
, page 37).
Содержание MF 4591
Страница 1: ...MF 4591 User Manual...
