54
Sagemcom · MF 4591
EN
Connect WLAN Adapter
Plug the WLAN adapter into the USB host connec-
tion.
USB-Stick anschließen
Switching Wireless
Networking (WLAN)
On/Off
· Switching Wireless Networking (WLAN) On/Off
Introduction
Wireless networking is activated by default. You have
the option of turning this function off.
1. Press
OK
,
080
and
OK
.
2. Use
[
to select whether you would like to turn
the function on or off.
3. Confirm with
OK
.
Setting up a
Wireless Network
(WLAN) Using the
Wizard
· Setting up a Wireless Network (WLAN) Using the Wizard
Introduction
You can integrate your device very quickly and easily
into an existing wireless network using Wi-Fi Pro-
tected Setup (WPS) or using a wireless network scan.
Using WPS, all important settings like network name
(SSID) are automatically configured and the connec-
tion protected with secure WPA Encryption.
Using Wi-Fi Protected
Set-up (WPS)
WPS
Using Wi-Fi Protected Setup (WPS), you can inte-
grate your device into an existing wireless network in
two different ways very quickly and easily. You can
activate the login with a pin code or using Push But-
ton Configuration (PBC), if your access point (Access
Point, Router) supports this method.
Using WPS with Pin Code
1. Press
OK
,
0811
and
OK
.
2. Select with
[
WPS PIN
.
3. A pin code appears on the display. Enter this pin
code in your access point (Access Point, Router).
4. Press
OK
on the device. The WLAN access point
and device connect automatically and create a
WPA protected connection.
Using WPS with Push Button
Configuration (PBC)
1. Press
OK
,
0811
and
OK
.
2. Select with
[
WPS PBC
.
3. Activate Push Button Configuration on the
WLAN access point. The WLAN access point and
device connect automatically and create a WPA
protected connection.
Using Network Scan
Introduction
Your device shows you a list of all available wireless
networks. A wizard helps you connect with the de-
sired wireless network.
1. Press
OK
,
0812
and
OK
.
2. The available wireless networks are displayed.
Use
[
to select the desired wireless network.
3. Confirm with
OK
.
4. Select an encryption standard or switch off net-
work security using
[
5. Confirm with
OK
.
6. Enter the password for the network.
7. Confirm with
OK
.
8. The device connects with the wireless network
and automatically attempts to obtain an IP ad-
dress.
Setting Up a
Wireless Network
(WLAN) Manually
· Setting Up a Wireless Network (WLAN) Manually
Introduction
The PC and all other devices must have their param-
eters set up to the same network as the multifunc-
tion machine. All required information for setting the
parameters, like name of the network (SSID), type of
wireless network, WEP key, IP address and subnet
mask must match the data from the network. You
can obtain the necessary information from the net-
work configuration of your computer or the access
point (Access Point, Router).
1. Press
OK
,
0821
and
OK
.
2. Entering the SSID.
WEP Key
With 64-bit encryption, the WEP key must
be either 5 characters (ASCII) or 10 num-
bers (hexadecimal). With 128-bit encryp-
tion, the WEP key must be either 13
characters (ASCII) or 26 numbers (hexa-
decimal). You can find the WEP key in the
network settings of your PC.
WPA Key
Enter an 8 to 63 character long password.
The password can contain alphanumerical
characters—numbers and letters—and any
other symbol available on the keypad. The
only invalid character is "€” (the euro cur-
rency symbol).
Содержание MF 4591
Страница 1: ...MF 4591 User Manual...
