SAGEMCOM Agoris M943, Руководство пользователя

Страница: 143 / 146

- 143 -
MF 5990 - Agoris M943
17 - Characteristics
Recommendations for use
Using sheets of labels:
• Recommended for laser printers
• Format A4 or Letter (sheets of self-adhesive labels).
Do not use sheets of labels:
• With easily removed labels or protective film that is unstuck.
• Allowing adhesive substances to show on the surface.
• Pre-cut or perforated.
Cards
Before starting printing cards, print out a test on standard paper to check page formatting.
Recommendations for use
Use cards
for laser printers.
Do not use cards:
• Coated.
• For ink-jet printers.
• Pre-cut or perforated.
• Pre-printed or multicoloured.
Transparencies
It is possible to print continuously on transparencies, but feed problems may occur due to the media quality, the
accumulation of static electricity and the print environment.
Before starting printing transparencies, print out a test on standard paper to check page formatting.
Main and additional paper tray Secondary paper tray
Capacity Up to 290 sheets of labels
depending on thickness.
Maximum height 49.4 mm Up to 100 sheets of labels
depending on thickness.
Maximum height 17.5 mm
Orientation Print side facing up Print side facing up
Driver Labels
Weight 64 to 163 g/m² (17.1 to 43 lb)
Duplex Not supported
Main and additional paper tray Secondary paper tray
Capacity Up to 200 cards depending on
thickness.
Maximum height 49.4 mm Up to 55 cards depending on
thickness.
Maximum height 17.5 mm
Orientation Print side facing up Print side facing up
Driver Standard paper
Weight 64 to 90 g/m² (17.1 to 24 lb)
Duplex See section Which paper formats can be used? [

139].
Note
If the cards are deformed, flatten them be-
fore loading them into the paper tray.
Main and additional paper tray Secondary paper tray
Capacity Up to 100 transparencies.
Maximum height 12.4 mm Up to 100 transparencies.
Maximum height 11.9 mm
Orientation Print side facing up Print side facing up