MF 5990 - Agoris M943
- 124 -
16 - Safety
• Never try to remove a fixed panel or cover. The machine contains high voltage circuits. Any contact with these cir-
cuits may lead to a risk of electric shock.
• Never try to modify the machine. This may cause a risk of fire or electric shock.
• Ensure that all paper clips, staples or other small metal parts do not enter the machine through the air vents or other
openings. These objects may generate a risk of fire or electric shock.
• Prevent any water or other liquids from being spilled on or near the machine. Any contact of the machine with water
or liquid may cause a risk of fire or electric shock.
• If liquid or a metal part accidentally penetrates the machine, switch it off immediately, disconnect the mains cable
and contact your retailer. Otherwise, you may be exposed to a risk of fire or electric shock.
• If the machine emits heat, smoke, unusual smells or abnormal noises, switch it off, disconnect it immediately and
contact your retailer. Otherwise, you may be exposed to a risk of fire or electric shock.
• Avoid using the machine during a thunder storm, as there may be a risk of electrical shock caused by lightening.
• Never move the machine during printing.
• If you want to move the machine, lift it. To move the machine, see the section Handling and moving the machine
[
125].
Precautions for using the touch screen
The following section describes the precautions to be taken when using the touch screen:
• Never use sharp or pointed objects on the touch screen. You risk scratching or breaking the screen.
• Never subject the screen to violent shocks or pressure. You risk breaking the touch screen.
Safety information
When using the machine, the following safety precautions must always be respected.
Safety during operation
To ensure continuous safe operation of your equipment, follow these safety instructions at all times (the list below is
non-exhaustive and may be added to or changed without prior notice).
In this section, the following symbols are used:
CAUTION
• Connect the power cable directly to the wall socket and never use an extension flex.
• Disconnect the power plug (by pulling on the plug and not the cable) if the power cable or plug show signs of wear
or damage.
• To prevent any risk of electric shock or exposure to laser beams, never remove any cover or screws other than
those specified in the instructions.
• Switch off the power and disconnect the power plug (by pulling on the plug and not the cable) if any one of the fol-
lowing situations occur:
–
You spill something on the equipment.
–
You suspect the equipment needs maintenance or repair.
–
The equipment cover is damaged.
• Never incinerate spilled or waste toner. Toner dust may catch fire if it is exposed to an open flame.
Place the machine in a well-ventilated room. When the machine is in operation, a small
quantity of ozone is generated. Unpleasant smells may emanate from the machine if it is
operated intensively in a poorly ventilated room. For safe operation, place the machine in a
well-ventilated room.
CAUTION
Indicates a potentially dangerous situation that may lead to death or
serious injury if instructions are not followed.
Warning
Indicates a potentially dangerous situation that may lead to minor or moderate
injury, or damage the equipment if instructions are not followed.
Содержание Agoris M943
Страница 1: ...TELECOM User Manual MF5990 Agoris M943...
