SAGEMCOM Agoris M943, Руководство пользователя

Страница: 142 / 146

MF 5990 - Agoris M943
- 142 -
17 - Characteristics
Recommendations for use
Avoid placing different types of paper (different weights or formats) in the paper tray as this may risk causing paper
jams.
Envelopes
Recommendations for use
Use envelopes:
• For laser printers, with diagonal closure, ordinary pre-glued folds, edges and flaps.
• Approved for laser printing.
• Dry.
Do not use envelopes:
• With self-adhesive flaps.
• With adhesive ribbons, metal attachments, clips or removable strips.
• With transparent windows.
• Of thick texture (example: reinforced envelopes).
• Comprised of fused, volatile, or discolouring material or emitting toxic vapours.
• Pre-sealed.
Labels
A sheet of labels is comprised of a front side (printable surface) and an adhesive back, covered with a protective film:
• The front side must meet standard Paper specifications.
• The front must fully cover the protective side, without allowing any adhesive to show on the surface.
You can print continuous sheets of labels but depending on the media used and the printing environment, paper feed
problems may occur. If so, stop the continuous print and print out sheets one by one.
Before printing on label sheets, it is recommended to print out a test on standard paper to check page formatting. For
more information concerning printing labels, consult your application documentation.
Orientation Print side facing up Print side facing up
Driver Fine
Weight 64 to 67 g/m² (17.1 to 18 lb)
Duplex See section Which paper formats can be used? [  139].
Main and additional paper tray Secondary paper tray
Capacity Up to 80 envelopes depending on
thickness.
Maximum height 49.4 mm Up to 20 envelopes depending on
thickness.
Maximum height 17.5 mm
Orientation Print side facing up Print side facing up
Driver Envelope
Weight 91 to 163 g/m² (25 to 43 lb)
Duplex Not supported
Note
Envelopes must be printed on the address
side. It is recommended to print outside the
three-play zones (front+back+flap) in order
to avoid printing problems (poorly printed
characters, etc.).
Main and additional paper tray Secondary paper tray