Reclining the Car Seat
20
19
Harness system must be installed correctly.
Failure to follow these steps can result in serious injury
or death.
From Back of Seat, Pull
Harness Straps Through
Shell
Harness straps
must
be in shoulder
harness slots
below
the metal bar
as shown.
Do not
twist harness straps.
sewn
end
Attach 2nd Harness Strap
Loops to Splitter Plate As
Shown
Sewn ends of the harness strap loops
must
face towards you.
Do not
twist harness straps or
harness adjustment strap.
Make sure the same harness strap
loops are fitted
completely on
both
sides of the splitter plate.
Check your child’s fit often.
The harness strap
must
be returned
to the upper shoulder harness slots
as your child grows.
13
12
This car seat has 3 positions.
To Recline:
Pull out on recline handle
and push top of child restraint back.
For More Upright:
Pull out on recline
handle and pull top of child restraint
forward.
Rear-Facing Mode
-
3
Reclined
or
2
Semi-Reclined
The level line on shell
must
be parallel with the ground using
either position
3
or
2
.
Forward-Facing Mode
-
1
Upright
or 2
Semi-Reclined
Booster Seat Mode
-
1
Upright
or 2
Semi-Reclined
NOTE:
When used in
Forward-Facing
or
Booster Seat
mode,
the semi-reclined position is to be used only to install the child
restraint or booster seat fl ush against the vehicle seat back.
Vehicle seat back must be upright.
