Aircraft Information
72
71
Attach 1st Harness Strap
Loops to Splitter Plate As
Shown
Thread Harness Straps into
Upper Shoulder Harness
Slots
If you will be using the lower
shoulder harness slots for
smaller children, see pages
16-19.
Harness system must be installed correctly.
Failure to follow these steps can result in serious injury or
death.
From Back, Thread Harness
Straps OVER Metal Bar
Do not
twist harness straps.
3
sewn
end
4
Sewn ends of the harness strap
loops
must
face towards you.
Do not
twist harness strap or
harness adjustment strap.
Make sure the same harness
strap loops are fitted
completely on
both sides of
the splitter plate.
2
If you cannot achieve a snug
harness fi t for your child, see
pages 16-19. To learn how to
check harness tightness, see
pages 53-55.
This restraint is certified for aircraft use when used with the
internal harness.
This child restraint is not certified for aircraft use when used as a
booster seat because aircraft seats do not have shoulder belts.
Install the child restraint in a window seat to avoid blocking the
aisle. If the aircraft lap belt is too short, ask the flight attendant for
a belt extender.
Use only on forward-facing aircraft seats.
Contact the airline for their specific policies.
Some airlines may ask to see a label
stating that this child restraint is certified
for aircraft use.
There is an airplane certification label
located on the side of this child restraint
as shown.
Store UAS belt, tether strap, and anti-rebound bar
when installing with aircraft belts.
Forward-Facing Aircraft Installation
Follow pages 44-47, skipping the tether
strap steps.
Rear-Facing Aircraft Installation
Follow pages 33-37, skipping the anti-
rebound bar installation steps.
