Rear-Facing Child Fit
10
9
Place Harness Straps Out
of the Way
The In and Out Harness Holders
can be used two ways:
1.
You can secure the harness
straps around them as shown.
2.
Or the buckle tongues can
be placed into the slots in the
harness holders as shown.
4
5
Place Child in Car Seat
to Determine Proper
Harness Fit
The child’s bottom and back
should be fl at against the
car seat.
1
2
For
Rear-Facing
child fi t, see page 10.
For
Forward-Facing
child fi t, see page 11.
Need to make adjustments?
To change headrest/harness height
, see page 12.
To change buckle position
, see pages 13-15.
Harness Strap Position
The harness strap
must
be
at or
slightly below
the shoulders;
never above.
Buckle Position
Buckle must be used in either the
1st or 2nd slot
. Choose the slot
closest to your child.
The buckle
should not be
underneath or behind
your child.
Head Position
The top of your child’s head
must be at least 2.5 cm
(1 in.) below
the top of the
car seat’s headrest.
1
2
Do not use 3rd slot in
Rear-Facing mode.
