continued on next page
Vehicle Belts
26
25
UAS Connectors
Adjuster
UAS Belt Storage
Location
UAS Belt Storage
Location
UAS
Belt Parts
To Remove UAS Belt from Storage Location on Car
Seat:
Press the red release button on each connector, then pull the
connectors off of storage attachments.
To Remove UAS Belt from
Vehicle UAS Bars:
Press the red release button on each
connector, then pull the connectors out
of the vehicle seat bight.
To Store UAS Belt:
When using vehicle belts, using the
booster seat mode, or when the car
seat is not installed in a vehicle
, the
UAS belt must be properly stored in its
storage location.
Thread UAS belt through rear-facing
belt path then attach connectors to
storage attachments as shown.
Gently tighten to remove slack.
Your vehicle’s features may be considerably different
than those pictured here.
If UAS anchors are not an option or if your child weighs more
than
18 kg
(40 lb), you must use the vehicle seat belt system to
install the child restraint.
Not all vehicle belts and seating positions will work with
child restraints.
Please go through the following steps to understand how
to lock a child restraint in
Rear-Facing
or
Forward-Facing
mode with a vehicle belt.
Lap/Shoulder Belts
