42
41
Tighten Belt
Place hand in child restraint.
Firmly push child restraint down
and towards the vehicle seat
back while pulling the free end
of the belt parallel with the
belt path through the belt path
opening as shown.
10
9
Attach UAS Connectors to
Vehicle’s UAS Anchors
Review your vehicle owner’s
manual for UAS anchor locations
and UAS belt use.
Make sure arrows on connectors
are facing up.
Fasten one UAS belt connector to
the anchor located in the vehicle
seat bight.
Repeat for other side of child
restraint.
11
Check Belt Tightness
Hold child restraint at the belt
path with your weaker hand.
Push and pull from side to side.
It should not move more than
2.5 cm
(1 in.).
Finished!
Check the tightness of the install
often to make sure it has not
loosened.
13
Recheck Rear-Facing
Level Line
Redo the installation if the
level line is not parallel with
the ground.
NOTE:
Only if necessary, you
may place a tightly rolled towel(s)
or foam pool noodle(s) under the
front of the base to help achieve
the correct recline. Check often
to be sure padding is still in
place and the belt is tight.
12
Secure Child in Car Seat
To properly secure your child in
the car seat, see pages 53-55.
Check your child’s fi t often and
make any needed adjustments
to the car seat as they grow.
If it moves more than 2.5 cm (1 in.), you can try:
A.
Pulling the belt tighter.
B.
Reinstalling the child restraint.
C.
Changing to a different seating location.
D.
Switching to vehicle belt installation.
