continued on next page
Forward-Facing
UAS + Tether Install
48
47
If it moves more than 2.5 cm (1 in.),
you can try:
A.
Putting your knee in the seat and pulling the belt tighter.
B.
Reinstalling the child restraint.
C.
Changing to a different seating location.
D.
Switching to the UAS belt installation if UAS anchors are
available in your vehicle.
10
Check Belt Tightness
Hold child restraint at the belt
path with your weaker hand.
Push and pull from side to side.
It should not move more than
2.5 cm
(1 in.).
Finished!
Check the tightness of the install
often to make sure it has not
loosened.
Securing Child in Car Seat
To properly secure your child in the
car seat, see pages 53-55.
Check your child’s fi t often and make
any needed adjustments to the car
seat as they grow.
Do not use the UAS anchors of the child restraint anchorage
system (UAS) to attach this child restraint when restraining
a child weighing more than 18 kg (40 lbs).
Before you begin installing the seat
into your vehicle, did you check:
Your child’s weight and height? See page 43.
Your child’s fi t? See page 11.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
1
2
Remove UAS Belt from
Storage Location
Remove it from the rear-facing
belt path so both connectors
are on the same side of the
seat.
Remove Anti-Rebound
Bar
You
must
remove the anti-
rebound bar to use this seat
in
Forward-Facing
Mode.
See pages 22-23.
