Before you begin installing the seat
into your vehicle, did you check:
Your child’s weight and height? See page 32.
Your child’s fi t? See page 10.
Do you need to make adjustments to the
harness/headrest height or the buckle position?
continued on next page
Rear-Facing UAS Install
38
37
Finished!
Check the tightness of the
install often to make sure it
has not loosened.
Recheck Rear-Facing
Level Line
Redo the installation if the
level line is not parallel with
the ground.
NOTE:
Only if necessary, you
may place a tightly rolled
towel(s) or foam pool noodle(s)
under the front of the base to
help achieve the correct recline.
Check often to be sure padding
is still in place and the belt is
tight.
12
Remove UAS Belt from
Storage Location
Or if the UAS belt was used
Forward-Facing,
remove it
from the Forward-Facing belt
path so both connectors are on
the same side of the seat.
Install Anti-Rebound Bar
You
must
install the anti-
rebound bar to use this seat in
Rear-Facing
Mode. See page
21.
1
2
