34
SL6+
SL6+ v.3.30 EN
Operating
The SL6+ can call in the following ways:
1. Intercom between machine room and car/pit/car-top, see below.
2. Make calls with a normal fixed phone line and through GSM.
3. Emergency calls to numbers at the press of the alarm button.
4. Test alarms at preset intervals.
5. Send receipts to SLCC alarm receiver for defined conditions.
6. Send SMS to one or several GSM phones at defined conditions
(GSM only).
7. Provoke test calls.
Calling with
SafeLine SL6+
Installing the handset and the
SL6+ in the machine room is
recommended.
The handset can not be called
from the car unit.
Intercom between machine
room and car/pit/car-top.
Main station to voice station:
Press 1-6 on the handset to call respective voice station.
Voice station to main station:
Press the button on the voice station briefly to call the main station.
(Hold the button for 5 seconds to make an emergency call.)
Intercom
between main
unit and
voice Station
Outgoing call
Press 0 to dial external telephone number. If the Safeline SL6+ is con-
nected to a PABX (switchboard), press 0 again for external dial tone to
calling out to the PSTN network. If a GSM board is installed, the SL6+
will use it as the default . If you want to use PSTN line instead, ensure
that there is no GSM board installed.
Turn off outgoing calls through the configurational handset using the
SafeLine CONNECT app:
Configuration -> Calls -> Config-handset test call
