13
SL6+ v.3.30 EN
Installation
3. Output A, yellow pictogram
The SL6+ can only recognize the PIN code if the
code is set to “1234”, “0000”, “1111” or if it is
deactivated. If set to anything else, the SL6+ can
not use the SIM card.
If the PIN code is set to “1234”, “0000”or
deactivated, the SIM card can be used on
any of SafeLine's GSM products.
Setting the PIN code
1. Insert the SIM card in an ordinary cell phone. In the phone's
security settings, change the PIN to “1234”. If not possible, set
the PIN code to “0000” or, if available, set the ”PIN code request”
option to “OFF”.
2. Verify the PIN code by switching your phone off and on again.
3. Make a call from your phone to verify that the SIM card is active.
4. Make a call to the SL6+ after insertion to ensure there is a proper
connection.
"1111" PIN code
If the PIN is set to “1111”, the code will be randomly generated by the
SafeLine GSM unit and memorized. This is a safety measure, making
sure the SIM card will only work with the selected SafeLine GSM unit.
To change the PIN again, use the PUK code provided to you by your
mobile services provider for setting up a new PIN.
If you want to upload a new SIM card for the GSM unit with a new “1111”
PIN, you will first need to upload a SIM card with PIN code “1234” or
“0000” to clear the old code in memory.
Activating the
SIM card
Note: If you enter the wrong
PIN code 3 times, the SIM card
will be blocked, requiring PUK
code to unblock. If so, the SL6+
can not be started and LED3 will
turn red.
