21
SL6+ v.3.30 EN
Configuration
Remote
configuration
with telephone/
calling the SL6:
step 1
In order to remotely configure or call a unit in the SL6+ system, the unit
must first be put into configuration mode via voice communication mode.
Follow the steps below to enter voice communication mode.
Multiple
SL6+ connected to
phone number?
1 short beep,
first SL6+ answers.
3 long tones,SL6+
answers.
Dial the phone
number of the SL6+.
Voice
communication
mode entered.
Press unit number [1-9].
1.
Dial the phone number of
the unit.
2.
If there is only one unit
in the system, proceed to
step 4. If there are multiple
units connected in parallel,
proceed to step 3.
3.
After 2 rings the first SL6+
unit answers with a short beep.
5.
When 3 long tones are
heard, the selected unit is
reached and voice communi-
cation mode is established.
Note: the telephone will now
beep every 5 seconds to notify
the passengers of the ongoing
call (anti eavesdropping).
4.
Choose which unit to
configure by pressing the
unit's number. Note: If there
are other SafeLine telephones
connected in serial you may
have to press the unit number
several times before the 3
long tones are heard.
