Saeco D.A. COMBISNACK, Использование и обслуживание

Страница: 39 / 68

39
English
BEVERAGE PREPARATION
The vending machine is able to dispense 9 beverages.
Each beverage can be prepared using coffee beans and/
or soluble products. The manager has can choose the
desired components (max 4) and the order of use. Each
component is identified by a number or a digit (Fig. 86).
Sugar
Soluble 1
Solubile 2
Soluble 3
Soluble 4
Fig. 86
Coffee beans C
- Protocol
It allows to choose the protocol used by the vending
machine to communicate with the payment system
installed on the vending machine:
- Executive protocol;
- BDV Protocol;
- MBD Protocol;
- PRICE HOLDING (ECS) Protocol.
- NO PROTOCOL (no serial protocol).
The “NO PROTOCOL” setting shall be used when a
payment system operating with one of the protocols
provided in the other settings “EXECUTIVE”, “PRICE
HOLDING”, “BDV” or “MDB” is not installed on the
VM.
This new setting is necessary since the VM always
checks the dialogue with the provided payment
systems. IF the VM detects any link absence, it signals
the anomaly on the display through the message “NO
LINK”.
This signal cannot be considered an error condition.
- Multivend
It allows to use possible residual credit to acquire other
beverages.
Setting “N” (no), the machine will store residual credit.
- Overpay time
It establishes the maximum time (expressed in seconds)
after which the machine stores the displayed residual
credit. It can be adjusted in 10-second steps. Setting
“000” the function is disabled.
- Scale factor
It allows to set the number of zeros fixed in the credit.
- NATION KEY
It allows the user to set the nation code (international
code) as required by the SAECO-NET program.
- Point position
It allows to set the point position of the decimal in the
credit.
BEVERAGE A
SEQUENCE 003C
BEVERAGE A
SOLUBLE 3: 005
- Sequence:
It defines the order in which the products making up
the beverage are dispensed.
No product corresponds to “0”, subsequently with the
combination of digits “C300” or “C030” or “0C30”,
product 3 and coffee beans will always be dispensed.
On the basis of the sequence the settings of the
parameters relevant to the products that make up the
beverage will be requested.
- Soluble:
It defines the quantity of the soluble product to be
dispensed.
Example: “005” indicates that 5 units of soluble product
3 will be used. The reference unit is preset by the
manufacturer.
The quantity of soluble product is adjustable from “0”
to “250” in steps of 1. Dispensing of the soluble product
does not occur when the parameter is set at “0000”
(in this case water is dispensed).