Saeco D.A. COMBISNACK, Использование и обслуживание

Страница: 17 / 68

17
English
5.4 Connection of trays
and spiral motors
On the right side of the trays there are 5 connectors that
can be matched to as many trays.
The selection number of the products to be dispensed is
set through the insertion of the tray and the fitting to the
respective
connector .
The drawing in figure 34 shows the subdivision of the
vending machine in cells. These cells are defined by the
crossing of 5 lines corresponding to 5 connectors with 6
columns corresponding to 6
spirals .
Fig. 34
Fig. 33
Important
The composition of the trays and the spirals supplied
represents for the Manufacturer the best equipment to load
the products.
Nevertheless, other types of spirals are available, on
request, which are suitable for any kind of products.
The snacks trays can be composed of single and/or double
spirals powered by a single motor (Fig. 33).
Important
In case one motor drives two spirals, these must have the
same pitch (one right and one left). To ease product
dispensing, a guide channel shall be inserted under each
spiral (Fig. 33).
Dispensing guide channel
for double spirals
Double spirals
Single spirals
Esempi di selezione
SELECTION A (ref. fig. 34)
To determine the
code
corresponding to selection
A
, first
indicate the number of the corresponding line
(1)
and
subsequently the number of the corresponding column
(3)
.
The final code will be
13
.
SELECTION B (ref. fig. 34)
To determine the
code
corresponding to selection
B
,
indicate the number of the corresponding line
(3)
and
subsequently the number of the corresponding column
(5)
.
The code will be
35
.
In this case the tray is composed of 4 spirals (2 double
and 2 single ones). In the double spirals, the column
number corresponds to the left spiral (in our example 1
and 5). We recommend that this setting be kept to have
uniformity among the different machines.
SELECTION C (ref. fig. 34)
To determine the
code
corresponding to selection
C
,
indicate the number of the corresponding line
(4)
and
subsequently the number of the corresponding column
(2)
.
The code will be
42
.
COLUMN 1 COLUMN 2 COLUMN 3 COLUMN 4 COLUMN 5 COLUMN 6
LINE 1
LINE 5
LINE 4
LINE 3
LINE 2