Saeco D.A. COMBISNACK, Использование и обслуживание

Страница: 22 / 68

22
English
Warning
The Manufacturer declines any responsibility for damages
to the vending machine and other objects and for personal
injuries caused by an incorrect installation of the payment
system. The responsibility falls on the person who installed
the system.
Connect the water supply hose to the vending machine 3/
4” Gas connection (Fig. 55).
Fig. 55
5.9 Water system connection
Important
We recommend that the vending machine be supplied with
water treated by a descaling device, particularly for water
with high content of calcium and magnesium (hard water).
Connect the vending machine to a drinking water supply
pipe with a pressure ranging between 1.5 and 8 bars (see
data plate).
Remove the plug from the coupling placed on the vending
back panel (Fig. 54).
5.10 Electric connection
Warning
The Maintenance Technician, who is responsible for the
vending machine installation, must ensure that:
-
the electric system complies with current regulations
on safety;
- the mains voltage corresponds to that indicated on
the data plate;
If in doubt, do not proceed to the installation and request
a careful check of the system by qualified personnel, able
to carry out these tasks.
The vending machine is equipped with a power cord that
must be plugged into the appropriate socket on the
machine rear panel (Fig. 56).
Do not use adapters or multi-sockets (Fig. 57).
Fig. 57
Fig. 54
Fig. 56