Saeco D.A. COMBISNACK, Использование и обслуживание

Страница: 30 / 68

30
English
Close the door and press key 1 (Fig. 60) to exit the
programming mode.
Fig. 81
Insert the cups into the central column, after this fill the
lateral compartments (Fig. 81).
Warning
The introduction of too many cups can cause the blockage
of the cup distributor.
Respect the Min. and Max. levels shown on the adhesives.
Widen the lateral sides (Fig. 80).
Fig. 80
7.5 SNACKS supply
Important
It is essential to use cold snack/drinks products that do not
require specific temperatures for their preservation.
Open the door and slide the trays towards the outside
until they block (see at sect. 5.3 the composition of the
trays and the spirals).
Load then the bottles starting from the most internal part
(motor sides) until the spaces on each spiral are filled (Fig.
82).
Fig. 82
Load the bags of snacks, positioning them horizontally on
the double spiral and in vertical position on the single spiral
until the spaces on each spiral are filled (Fig. 83).
Fig. 83