Saeco D.A. COMBISNACK, Использование и обслуживание

Страница: 38 / 68

38
English
- Beverages validation
It allows to enable or disable the beverage keys.
Example:
The keys indicated with a capital letter are enabled,
those with a lower case letter are disabled,
consequently pressing them during normal functioning
will display the message “NOT AVAILABLE”.
To enable/disable the beverage keys it is necessary to
press the same beverage key. On each pressing the
corresponding letter will move from lower case to upper
case and vice versa.
- Free vend button
It allows to enable key 3 (Fig. 60) of the CPU card, to
the free dispensing of a product (beverage/snack)
during the normal operating phase.
- Cup Selling Key
It allows to assign cup selling to CANCEL key.
Choosing ‘ENABLED’ the CANCEL key will work as a
selection key for the cup product.
- Reset validation
It allows to ‘RESET’ the data in the maintenance menu
(STATISTICS).
- Language
It allows to select the language to be used by the
vending machine.
- Modify password
It allows to modify or set the password.
The password consists of a number between 0001 and
65536. The 0000 value (default value) means no
password.
To set the password, press
UP and DOWN keys and
confirm using ENTER key.
Recommended solutions
To speed up the input of the password digits, the beverage
keys (A, B, C etc.) are combined to the following values:
Key Value
A +10
B -10
C +100
D -100
E +1000
F -1000
Channel Payment system
1 Parallel coiner
2 Parallel coiner
3 Parallel coiner
4 Parallel coiner
5 Parallel coiner
6 Parallel coiner/mechanical coiner
7 Canceling/mechanical coiner
Example: to set the value 12353 it is necessary to press:
-
12 times the E beverage key;
- 3 times the C beverage key;
- 5 times A key;
- 3 times UP key;
- to confirm press ENTER key.
- Complete menu
It allows to choose whether the entries of the
programming menu should be shown entirely or only
partially.
The least frequently used entries are highlighted by a
frame outlined at 8.2.2 and can be shown only if in
the data “Y” is set in this function.
PAYMENT SYSTEM
The entries of the PAYMENT SYSTEM are:
- Parallel coiner
It allows to enable the parameters of the parallel coiner,
of the mechanical coiner, the canceling machine and
the choice of values to assign to the single money
channels.
- Enables
Setting “Y”, management of the parallel coiner, the
mechanical coiner and the canceling machine are
enabled.
Setting “N”, a parallel coiner possibly attached to the
vending machine is disabled.
- Coin value
It allows to set the value of the coins transferred to the
vending machine from the parallel coiner, the
mechanical coiner and the canceling machine.
The following table shows the combinations channel/
payment system.
VALIDATION DEVERAGES
YES: ABCDefGHI