44
1
2
3
4
FRONTWHEEL
Removing the front wheel
CAUTION
Take care not to damage the brake discs and linings while
removing them.
Do not operate the handbrake lever after the wheel has
been removed.
Protect the wheel bearings from dirt and moisture.
- Support the motorcycle so that the front wheel can move freely
and the motorcycle is standing securely.
- Loosen the axle nut (1).
- Lift the front wheel and pull out the full-fl oating axle (2) and
remove the spacer bush (3).
- Remove the front wheel downwards.
Installing the front wheel
CAUTION
Take care not to damage the brake discs and linings (4)
while installing them.
- Roll the front wheel in between the fork tubes and insert the
spacer bush (3) (on the right as seen from the riding direc-
tion).
- Grease the full fl oating axle (2) and push it in from the right
as far as it will go.
- Attach the axle nut (1) and screw tight.
- Before tightening the screws, stand the motorbike on its
wheels and push the telescopic forks several times to
prevent twisting of the fork struts.
Torque
Axle nut (1): 45-55 Nm
MAINTENANCE
Содержание madass
