Sachs Bikes madass, Инструкции по ремонту

Страница: 199 / 218

(1) INDEX MARK
(2) "F" MARK
196

IGNITION SYSTEM
ALTERNATOR
(Exciter coil)
Disconnect the alternator wire connector.
Measure the resistance between the Black/Red and ground.
RESISTANCE: circa 550
Ω
If the resistance is out of specifi cation replace the alternator.
PULSE GENERATOR (PICKUP)
Remove the battery cover and the battery.
Disconnect the alternator 6- pole connector and measure the
resistance between the blue/white wire terminal and ground.
RESISTANCE: circa 150
Ω
If the resistance is out of the specifi cation, replace the
alter nator.
IGNITION TIMING INSPECTION
NOTE
The Capacitive Discharge Ignition (CDI) system is factory pre-
set and does not require adjustment. To inspect the function of
the CDI components, ignition timing inspection procedures are
given here.
Remove the left crankcase cover.
Connect a tachometer and timing light.
Start the engine and allow it to idle.
IDLE SPEED: 1.800 +/- 200 rpm
Inspect the ignition timing
Timing is correct, if the "F" mark on the fl ywheel is aligned with
the index mark on the left crankcase at idle.