9
3
2
4
1
5
8
8
6
7
11
10
124
CLUTCH/GEARSHIFT LINKAGE
RIGHT CRANKCASE COVER REMOVAL
Drain the oil from the engine.
Support the motorcycle using a safety stands and remove the
side stand with the footrest by removing the four bolts (1).
Disconnect the clutch pull cable (2).
Remove the kick starter pedal (3).
Remove eight screws and take off the right crankcase cover
(4).
Remove the gasket (5) and two dowel pins (6).
CLUTCH REMOVAL
Remove the clutch outer cover (7) by removing the four screws
(8).
Straighten the lock washer tab (9).
Hold the clutch outer with a clutch holder.
TOOL:
Crownnut wrench
P14649941920000
Remove the lock nut (10) with a lock nut wrench and extension
bar.
Remove the plain washer and lock washer.
Remove the clutch assembly (11).
Содержание madass
