Rutenbeck TC Plus analog, Руководство по эксплуатации

Страница: 79 / 84

9 Troubleshooting 79
Fault Help/Measure
The TC Plus cannot call The phone line is not or is wrongly plugged in.
The TC Plus is operated within a PABX and
• the dial tone recognition is switched on
• the line access number is not activated
• the connection has no subscriber line authorization.
The account on the SIM card has been used up (TC Plus
GSM).
Dial attempt set to „0“.
External switch (ES) is activated.
The TC Plus cannnot send
SMS The wrong provider has been selected (e. g. D2 for T-Mobile
or D1 for Vodafone).
The line access number has not been set.
The account on the SIM card has been used up (TC Plus
GSM).
The prefix number clusters ”0193“ or „0900“ are blocked and
„Telekom Festnetz-SMS“, or „Annyway“ as provider has been
selected. (Both providers are using these two number clus-
ters for their SMS Center).
The TC Plus does not accept
a call The phone line is not or is wrongly plugged in.
The number of ringing signals is set to “0”.
CLIP number has been activated, but no CLIP number was
set (1 number is sufficient).
AB operation (answering machine mode) is activated.
EIB functions are not active The initialization time of about 1 min has not yet elapsed,
i. e. not all the device states have been requested yet.
The EIB has not been activated in the initial settings.
The EIB outputs cannot be
switched via telephone The EIB bus has not been connected.
The EIB bus has not been activated in the initial settings.
When switching on the TC
Plus, an EIB alarm is activated
in spite of no device being
connected The switch-on value is set negative. The TC Plus has been
sent a value of “0” since no device has been connected and
“0” is bigger than the negative switch-on value.
The states of the EIB objects
are not being adopted after a
reset The remote stations are not connected.
The „reading flag“ of the sensors/actors has not been set
(ETS setting).
The 3rd and 4th dial attempt
have not been carried out
Dial attempt set to 2.
Both dial attempts have been de-activated.
After the 2nd dial attempt there has been a confirmation.
The call number has not been activated.
9 Troubleshooting