Rutenbeck TC Plus analog, Руководство по эксплуатации

Страница: 42 / 84

PARAMETER INPUT
Phone number
> back
Type of message
INPUT
Announcements
> back
1. Dial attempt
INPUT
save
> Announcements
back
ANNOUNCEMENTS
play
> back
record
PARAMETER INPUT
Type of message
> Next message On
Dial attempt Off
PARAMETER INPUT
Type of message
> Next message Off
Dial attempts OffF
PARAMETER INPUT
Next message On
> Dial attempt Off
Use line ac.no. Off
Enter your phone number as
described, e. g. under CLIP
number (see p. 37).
Then continue entering the
parameters in the PARAME-
TER INPUT MENU. By setting
the USE LINE AC. NO. item to
On you switch active the line
access number and the dia-
ling break which have been
entered in the TELEPHONE
OPTIONS MENU.
Display Operation
PARAMETER INPUT
Next message On
> Dial attempt On
Use line ac.no. Off
PARAMETER INPUT
Dial attempt On
> Use line ac.no. Off
Phone number
PARAMETER INPUT
Dial attempt On
> Use line ac.no. Off
Phone number
42 6 Configuration
You can programm the 6 con-
ventional inputs and the 10
EIB inputs each with up to 4
destinations (dialing attempts)
to which incoming alarms
should be re-directed (e. g.
security company or your own
mobile phone).
For each dial attempt you can
select among 4 message
types:
• announcement by phone,
• SMS,
• e-mail or
• fax machine.
For these methods you can
determine the appropriate
phone numbers or addresses,
and the type of message
(text message or voice mes-
sage/announcement).
For each input you can also
determine if the alarm should
be activated by a make con-
tact or by a break contact.
When using the message
types SMS, e-mail, or fax ma-
chine you should set the
menu item NEXT MESSAGE to
On, in order to send off the
defined voice message, be-
cause with these methods the
confirmation is effected after
transmitting to the provider or
to the fax machine, and it is
not ensured that the message
has been read.
If there is no confirmation, a
local alarm will be sent off and
on the display of the TC Plus
the text “Dial attempt not suc-
cessful” will appear.
If there is no phone number
programmed, the local alarm
is being switched on immedia-
tely and the display will read
“No phone number”.
For a detailed example of the
steps of an alarm memory see
p.71 (chapter “Function”). Display Operation
SETTINGS
Announcements
> Inputs
PC programming
INPUTS
Input 1
> back
Input 2
INPUTS
Input 6
> Input 1
back
INPUT
Input announc.
> back
1. Dial attempt
INPUT
back
> 1. Dial attempt
2. Dial attempt
PARAMETER INPUT
back
> Type of message
Next message Off
PARAMETER INPUT
Phone number
> back
Type of message
MESSAGE TYPE
back
> Speech output On
SMS
MESSAGE TYPE
Fax
> back
Speech output
MESSAGE TYPE
Fax
> back
Speech output On
MESSAGE TYPE
Fax
> back
Speech output On
PARAMETER INPUT
Use line ac.no. On
> Phone number
back
PARAMETER INPUT
Phone number
> back
Type of message
6.1.3 Alarm Inputs Menu
6.1 Configuration by Turnkey