Rutenbeck TC Plus analog, Руководство по эксплуатации

Страница: 21 / 84

4 Settings 21
The user guide of the TC Plus
is supported by a 4 line 20
character display.
There the following informati-
ons can be read:
• First line:
device digit
state massage (e. g. ”line
failure”)
In case of a TC Plus GSM:
additionally, the field strength
between ”00” and ”99”
• Second line:
switched outputs (A) in the
following sequence:
conventional devices (1 to 6)
space
EIB outputs (1 to 10)
inactive outputs are not
being displayed
• Third line:
switched inputs (E) in the fol-
lowing sequence:
conventional devices (1 to 6)
space
EIB outputs (1 to 10)
inactive outputs are not being
displayed
• Fourth line:
time, day and date
TC Plus 56
O 12 1
I 4 678 0
08:15 Sa 27.11.04
The performance features of
the TC Plus can be adjusted
as desired. All settings (ex-
cept for time and date) will be
restored in case of a failure of
the 230 V network.
Before initial operation a few
necessary parameters are to
be programmed:
The setting is done by turn-
key. By turning the turnkey the
parameter which is supposed
to be set changes its value or
its position. By pressing the
turnkey the changed parame-
ter is fixed or the setting is
confirmed.
In case of ON/OFF settings
the value changes each time
the turnkey is pressed.
By pressing the turnkey you
can also confirm a reported
alarm. The TC Plus will be delivered
with the following settings:
• Amount of dial attempts:
12
• Code number: 0000
• 1st to 5th CLIP
number: none
• Amount of ringing signals:
2
• Line access number:
x (= none)
• Dial tone recognition:
Off
• Pause: 0
• EIB module: Off*
• Display language: English
• Answering machine mode:
Off
• Announcement texts:
are given
(see page
78 and 79)
The TC Plus analog, in additi-
on, has the following default
setting:
• Dialing method: DTMF
The TC Plus GSM, in addition,
has following default setting:
• PIN number: 0000
4.3 Default Settings 4.2 Display 4.1 Operating Element
* For the types TC Plus EIB
the default setting is ”EIB
module On”.
4 Settings