Rutenbeck TC Plus analog, Руководство по эксплуатации

Страница: 43 / 84

6 Configuration 43
TC PLUS
00:00 Sa 27.11.04
All menu items can also be
programmed by PC more
comfortabely.
To download the present set-
tings from or to the PC, the
TC Plus must be set to “PC
programming”.
For detailed directions see
chapter “Configuration by PC
(see p. 45).
Display Operation
SETTINGS
Initial settings
> back
Announcements
SETTINGS
Inputs
> PC programming
Switching outputs
PC PROGRAMMING
Press push-button to stop
For playing or recording an-
nouncements continue as
described under “Call up an-
nouncements” (see p. 40).
For the message types fax
machine and SMS the same
procedure applies as descri-
bed under “Call up announce-
ments”. Here, too, the appro-
piate phone number has to be
entered. Instead of an an-
nouncement you can compo-
se a message under GENE-
RAL ANNOUNC. which can
have 160 characters at the
maximum. In case of an
alarm, the message will be
forwarded via fax or sent as
SMS.
Note: Please observe that the
e-mail address (phone num-
ber with the message type “e-
mail”) has to be included into
the number of characters allo-
wed. And furthermore, a pro-
vider must be set supporting
e-mails.
In case you want to make the
same entries for all inputs you
can, after having configurated
input 1, select the SAVE FOR
ALL INPUTS MENU item and
your data will be automatically
copied to the remaining alarm
inputs.
6.1 Configuration by Turnkey
For outputs 1 to 6 you can
hear or record the appropriate
announcements of the swit-
ching states On or Off.
Moreover, you can set the
CURRENT IMPULSE MODE
and define the INIT CONDITI-
ON, i. e. you determine which
state the device is supposed
to have when restoring the
line voltage after a power fai-
lure.
The EIB outputs can be set by
ETS (software), and the an-
nouncements can be set in
the ANNOUNCEMENT MENU.
6.1.5 Switching Outputs
Menu 6.1.4 PC Programming
Menu 6.1.3 Alarm Inputs Menu