Rutenbeck TC Plus analog, Руководство по эксплуатации

Страница: 38 / 84

38 6 Configuration
6.1.1 Initial Settings Menu
With this parameter you can
determine how many ringing
signals there should be until
the TC Plus accepts the call.
A number of 9 ringing signals
(maximum) can be program-
med. Up to this point in time it
is possible to request the call
on a phone which is installed
at this connection (TC Plus
analog and TC Plus ISDN
only). If you have programmed
“0” as number of ringing sig-
nals, no call will be accepted.
The setting of ringing signals
will be ignored if the TC Plus
is being operated in the ANS-
WERING MACHINE mode (TC
Plus analog only).
In order to analyze a CLIP
number the number of ringing
signals has to be set at least
to 2. Otherwise, the TC Plus
cannot exactly recognize the
phone number and display it.
6.1.1.6 Set Telephone Options 6.1.1.5 Select Provider
When programming phone
numbers you can also save
specific features of your
PABX.
These are – according to the
respective mode of operation:
Table 1
In case the dial tone recogniti-
on is set active the dialing will
be cancelled if no dial tone
can be recognized. This per-
formance feature can only be
programmed if the TC Plus is
connected directly to the sub-
scriber line.
Set line access number:
Analog ISDN GSM
Line access no. x x -
Pause x x -
Fax identifier x - -
Dialing method x - -
Dial tone recog. x - -
MSN number - x -
PIN number - - x
Display Operation
INITIAL SETTINGS
Answ.mach.mode ON
> back
Dial attempts
INITIAL SETTINGS
CLIP number
> Ringing signals
Provider selection
RINGING SIGNALS
0
save cancel
RINGING SIGNALS
5
save cancel
RINGING SIGNALS
5
save cancel
INITIAL SETTINGS
Answ.mach.mode ON
> back
Dial attempts
INITIAL SETTINGS
Answ.mach.mode ON
> back
Dial attempts
Display Operation
INITIAL SETTINGS
Ringing signals
> Provider list
Factory defaults
PROVIDER
Provider 1
> back
Provider 2
PROVIDER
Provider 4
> Provider 1
back
PROVIDER SELECTION
No Provider
> back
D1 T-Mobile
PROVIDER
E-Plus
> back
Provider 2
PROVIDER SELECTION
D2 Vodafone
> E-Plus
T-Com Festnetz SMS
In the same way you can set
more providers.
Display Operation
INITIAL SETTINGS
Answ.mach.mode ON
> back
Dial attempts
INITIAL SETTINGS
Provider selection
> Telephone options
Time/Date
TELEPHONE OPTIONS
Pause 0
> back
Line access no. X
TELEPHONE OPTIONS
back
> Line access no. X
Fax identifier
6.1.1.4 Set Number of Rin-
ging Signals
For analog and ISDN operati-
on you will need a provider in
order to send e-mails and
SMS’s. You can select from a
list of providers, however, you
must observe that the provi-
der will match the phone num-
bers you have entered in the
TYPE OF MESSAGE MENU.
The parameters will set them-
selves automatically.
For TC Plus GSM operation
you can set identifiers for fax
machine or e-mail.