Rutenbeck TC Plus analog, Руководство по эксплуатации

Страница: 47 / 84

6 Configuration 47
6.2.4 Initial settings
In the INITIAL SETTINGS menu
you can program the following
features:
1 Number of ringing sig-
nals
Number of ringing signals
until activation (maximum 9).
2 Alarm dialing
Number of dial attempts to
the programmed destinati-
ons which are carried out in
case of an alarm (maximum
12).
3 Code number
Here you can change the
default code number (4 di-
gits). It will be requested for
incoming calls.
4 Date and Time
Display of date and time
from the PC; adopted when
saving the configuration in
the TC Plus if “Save in TC
Plus” is activated.
5 Serial interface
PC interface to which the
PC is connected.
6 Display language
You can select from 6 lan-
guages in which the confi-
guration program and the
display texts will be shown.
7 CLIP numbers
Setting and analyzing of
CLIP numbers for remote
switching and remote re-
quests if “Analyze CLIP
number” is activated. Other-
wise, no number can be
entered. Only if the phone
number of the caller mat-
ches exactly the program-
med CLIP number the TC
Plus will accept the call. “
”
stands for any character.
8 Provider
List of popular providers for
text messages (see also pp.
6, 7).
9 Answering machine mode
If set to ON calls are only
accepted by the answering
machine; the possibility to
set the number of ringing
signals is not active. The TC
Plus can only be addressed
by a special procedure (see.
p. 74).
10 EIB
Activation of EIB module,
default setting with EIB
types.
9
1
2
3
7
5
4
6
8
10
6.2 Configuration with the PC