Ruijie RG-R SR30 Series, Руководство по установке и справочное руководство по оборудованию

Страница: 37 / 59

Hardware Installation and Reference Guide Overview
Attributes of the NMX-6FEH
The NMX-6FEH module provides 6 10/100Mbps Ethernet interfaces, which adopt the RJ45 connector.
The basic attributes are as below:

NMX-6FEH
Protocol
802.3-2000 standard
Number of interfaces
Six
Interface type 10Base-T/100Base-TX interface
Environment index:
Operating temperature: 0°C ~45°C
Storage temperature: -20°C ~70°C
Operating humidity: 10%~90%
EMC
EMI: GB 9254-1998 Class A
EMS: GB/T 17618-1998
Hot-plugging Supported
Module Cable
The NMX-6FEH module uses standard Cat-5 8-core unshielded twist pair with RJ-45 connector. If the NMX-6FEH
module is in the auto-negotiation mode, the MDI/MDIX adaptation is supported and the standard or cross-over network
cables can be used. While the NMX-6FEH is in the mandatory mode (the rate is 10/100Mbps and the duplex mode is
half/full duplex), only the cross-over network cables can be used.
The follow table shows the relationship of the standard cable sequence.
Pin number A B
1 Orange-white Orange-white
2 Orange Orange
3 Green-white Green-white
4 Blue Blue
5 Blue-white Blue-white
6 Green Green
7 Brown-white Brown-white
8 Brown Brown
The follow table shows the relationship of the cross-over cable sequence.
Pin number A B
1 Orange-white Green-white
2 Orange Green
3 Green-white Orange-white
4 Blue Blue
5 Blue-white Blue-white
6 Green Orange