Hardware Installation and Reference Guide
Overview
Appearance and Indicators
Appearance of the SIC-3G-TD interface card
Panel indicator description:
Indicator
Description
RDY
Solid on means that firmware initialization of the line card is complete.
OFF means the firmware initialization of the line card is not complete or fails.
WWAN
Solid on means the link is through.
Flashing means the data is being transmitted.
RSSI
Solid on means the strong signal.
Flashing means the medium/low signal.
Off means the weak signal or no signal.
HSDPA
Solid on means the HSDPA service is effective.
Off means there is no HSDPA service.
EDGE
Solid on means the EDGE service is effective.
Off means there is no EDGE service.
Attributes of the SIC-3G-TD Card
The basic attributes are as below:
SIC-3G-TD
Number of ports
SMA RF: 1
RJ-45: 1
Interface type
SMA RF is used to connect antenna.
RJ45 is for the internal commissioning.
Cable
SMA RF : N/A
RJ45: Serial port cable
Supported Rate
HSDPA (in theory: 2.8 Mbps downlink and 384 kbps uplink)
Operating Temperature
Operating temperature: 0°C ~45°C
Storage temperature: -40°C ~70°C
Humidity
Operating humidity: 10%~90%
EMC
EMI: GB 9254-1998 Class A
EMS: GB/T 17618-1998
