Hardware Installation and Reference Guide
Overview
Interface rate
155.52 Mbps
Output
optical
power
Type
Short-haul
multimode
Medium-haul
single mode
Long-haul single
mode
Ultra long-haul
single mode
Minimum
-20.0 dBm
-15.0 dBm
-5.0 dBm
-5.0 dBm
Maximum
-14.0 dBm
-8.0 dBm
0 dBm
0 dBm
Receiver sensitivity
-30.0 dBm
-28.0 dBm
-34.0 dBm
-34.0 dBm
Overload optical power
-14.0 dBm
-8.0 dBm
-10.0 dBm
-10.0 dBm
Central wavelength
1310nm
1310nm
1310nm
1550nm
Maximum transmission
distance
2km
15km
40km
80km
Fiber type
50/125um
9/125um
9/125um
9/125um
Module Cables
This module comes with no cables, that is, the cables and SFP parts are sold separately.
NMX-6FEH
NMX card model: NMX-6FEH
Appearance and Indicators
Appearance of the NMX-6FEH 6-port 100M Ethernet module
The module has the status indicator for each port and the line-card RDY indicators.
RDY indicator: Solid green means the line-card is powered on and initialized. Off means the line-card is not
powered on or not initialized.
Speed indicator: Off means the port is not connected. Solid green means the 100Mbps connection is established
on the port. Soild yellow means the 10Mbps connection is established on the port.
Link/ACT indicator: Off means the port is not connected. Solid green means the 100Mbps connection is
established on the port. Solid yellow means the 10Mbps connection is established on the port. Blinking green
means the data at the rate of 1000Mbps is being tranceived on the port. Blinking yellow means the data at the rate
of 10Mbps is being tranceived on the port.
