RSP P1301A, Руководство по установке и обслуживанию

Страница: 14 / 36

14 M0627-1 version 3.3
3.1.2 Every six-months or 250,000 tool changes
The following maintenance activities should be carried out every six-months or after every 250,000 tool
changes, whichever comes first.
Activity Equipment Description
Cleaning
and
lubrication Tool changer Locking balls Clean locking balls and add new
lubrication, (section 3.2.3).
Guide pins Clean guide pins and add new
lubrication (section 3.2.3).
Air sealings Clean sealings (section 3.2.3).
Spring-loaded pins Clean spring-loaded signal pins (section
3.2.3).
Signal and servo
power sockets Clean around the sockets and add new
lubrication (section 3.2.3).
High voltage sockets Clean around the sockets and add new
lubrication (section 3.2.3).
Tool attachment Locking cavities Wipe cavities of locking balls clean
(section 3.2.4).
Guide holes Clean the holes for the guide pins and
add new lubrication (section 3.2.4).
Signal and servo
power pins Clean and servo power pins (section
3.2.4).
High voltage pins Clean high voltage pins (section 3.2.4).
3.1.3 To replace when damaged or worn-out
Equipment Description
Tool changer Air sealings See section 4.3.1 or 4.3.2
Guide pins See section 4.3.3
Spring-loaded signal pins See section 4.3.4
Signal interface See section 4.3.5
Servo power interface See section 4.3.5
High voltage interface See section 4.3.5
Air module See section 4.3.5
Tool attachment Signal interface See section 4.3.6
Servo power interface See section 4.3.6
High voltage interface See section 4.3.6
Air module See section 4.3.6
O-rings See section 4.3.7