RSP P1301A, Руководство по установке и обслуживанию

Страница: 21 / 36

M0627-1 version 3.3 21
3.2.4 Cleaning and lubrication of tool attachment
The following maintenance activities should be carried out on the TA every 6th month or
after 250,000 tool changes, whichever comes first.
Action Note
Clean locking cavities Clean the cavities of the locking
balls.
NOTE!
It is important that this is done or
else there is a risk that the tool
attachment jams.
Clean and lubricate holes for the guide pins Wipe clean and apply small amount
of grease (Molykote BR2Plus)
inside the guide pin holes.
Clean servo power pins Wipe clean the signal and servo
power pins with a cotton swab.
Clean high voltage pins Wipe clean the high voltage pins
with a cotton swab and the surface
around the pins with a lint free
cloth!