Rotary SL230RA-PE, Руководство по установке

Страница: 16 / 30

Installation Instructions ROTARY inground lifts SL230/SL235/SL2
50 • Release: 11/2013 • Page 16
7. Installation of the supports
7.1 SL235MP
Raise the lift for appr. 1 m. Put the pre-assembled flat carriers parallely on the cylinders and fix it with the cylindric
screws M20x50.
Then test, whether the support plate is slightly adjustable and the setscrews for limit of the maximum departing
lengths are screwed in. The setscrews avoid the support plates from pulling from the flat carriers.
You can improve the sliding of the cross plates using spray oil.
7.2 SL235RA und SL250RA
Raise the lift for appr. 1 m. Lift the carrier plate on the cylinder. The carrier plate are orientated outwards from the
cylinders. Then fix it with the cylindric screws M20x50 (model SL235RA) resp. M24x60 (model SL250RA).
Defer slide with swivel arms onto carrier plate and screw in setscrews if not pre-assembled ex works. After that
please check if all moveable parts (carrier plate, swivel arms, extension arms etc.) are easy to move and correctly
locking. In the down position the swivel arms must unlock automatically.