Rotary SL230RA-PE, Руководство по установке

Страница: 5 / 30

Installation Instructions ROTARY inground lifts SL230/SL235/SL2
50 • Release: 11/2013 • Page 5
2. Installation of the inground cassette
2.1 Foundation plan
Installation, adjustment and concrete of the in-ground cassette is described in detail in the
respective foundation plan. Ensure before installation that you have the valid foundation plan.
Model Foundation plan
SL235MP, SL235RA,
SL250RA, SL235S3, FP1335
SL235DOP FP1335 *
SL230RA-PE
SL235BR, SL235BR-RA
SL250BR-RA FP2285
* If the platform lifts have to be installed inground or inground
together with floor level compensation you have to use different
foundation plans!
Table 1: Foundation plans
2.2 Lifting into the cavity
To move the inground cassette into the cavity use either 2 eye screws or the auxiliary profiles together with a belt.
The eye screws have to be fixed diagonally through wood cover and basic executions into the screw threads of the
cassette. Use the inner threads of the basic executions (fig. 2, ´X´). In this case you can fix the auxiliary profiles at
the outside later on. Now lift the inground cassette into the cavity using a suitable lifting device.
2.3 Inground installation options
In general there are two main possibilities for inground installation (fig. 1 and 2). In principle it makes no difference
if the cassette is ´empty´ or ´pre-assembled´ inclusice the complete hydraulic system inside (standard delivery).
Do not forget the vacant pipe from the inground cassette towards the site of the control (see
foundation plan). The connection between vacant pipe and the cassette must be water-tight! Don´t cut the vacant
pipe at the wall not at floor level to avoid penetration of water!