Rotary SL230RA-PE, Руководство по установке

Страница: 11 / 30

Installation Instructions ROTARY inground lifts SL230/SL235/SL2
50 • Release: 11/2013 • Page 11
5.3 Installation of pneumatic emergency system
The pneumatic emergency system allows lowering of the lift in case of power failure. Also lead the delivered
pneumatics hose

4x1 mm of the power unit through the empty tube to the control unit (already at works pre-
assembled). Lead the pneumatic hose through the smallest cable gland there into the case and embed it onto the
planned compressed-air inlet from the inside (fig. 10).
Fig. 10 Connection of the pneumatic pipe
5.4 Adjustment of the proximity switches (NAMUR)
The NAMUR-switches (inductive switches) are pre-adjusted completely at factory (fig. 11). Normally there is no use
for further adjustment.
Fig. 11: Both NAMUR-switches
installed for use.