Rosenberg H42 Series, Инструкция по эксплуатации

Страница: 40 / 51

40
The automatic mode of the fans can be set. For the setting external signal 0-
10V to change the set point this display is shown.
The basic selection is:
-
Temperature difference
-
0-10V Signal
The external signal 0-10V can be defined as:
-
CO2
-
VOC
-
Relative humidity
The effect of this setting is the application of the corresponding sensor and
control method.
The automatic mode of the fans can be set when changing the set point. For
the setting external signal 0-10V and CO2 the display is shown.
The control value of the fan speed in percent of the unit type SupraBox
COMFORT volume flow and the corresponding sensor scale were set in this
scale.
The automatic mode of the fans can be set when changing the set point. For
the setting external signal 0-10V and VOC the display is shown
The control value of the fan speed in percent of the unit type SupraBox
COMFORT volume flow and the corresponding sensor scale were set in this
scale
The automatic mode of the fans can be set when changing the set point. For
the setting external signal 0-10V and relative humidity the display is shown.
The control value of the fan speed in percent of the unit type SupraBox
COMFORT volume flow and the corresponding sensor scale were set in this
scale
The automatic mode of the fans can be set. The control value of the fan
speed in percent of the unit type SupraBox COMFORT can be shown in this
display within the limits of the manufacturer.
In the basic setting unit type SupraBox COMFORT the standard values were
called up. For the dynamic control method (PI-Control) the proportional part
and the integration part were set in this display.
A high integration part obtained through an increased integration time
slowed down the dynamic. These slowed down dynamic is increased
through the proportional part. A recording of the control temperature is rec-
ommended so that a change in the integration part with the temperature
fluctuations can be determined.
Wrong settings can lead to oscillations at the fan speed, the air flow and air
supply. The noises of the fan when switching on show the result of the set-
ting.