18
Key [
Enter
]
Arrow key „middle“
In the display; Choose the current adjustable parameter value for operation
The Cursor / pointer jumps to the setting value manual temperature value-set
point.
Confirming of the current changed parameter value setting value manual
temperature set point.
During the automatic operation the ventilation intensity will be automatically
calculated. A distinction is made here between two variants:
1.
If there is an external sensor for moisture measurement, air quality
measurement or pressure measurement with a 0-10 V out, the sensor value
is applied in order to determine the optimal ventilation demand. The volume
flow measurement takes place with the connected sensors and the installed
air tubes. With the default setting volume flow the automatic mode can be
set with selected sensor or sensor values.
2.
The used sensors for the automatically modification of the ventilation
intensity can be from the type temperature, humidity, air quality VOC and
CO
2
concentration. The larger the current temperature deviation the more is
ventilated. The Fans were operated therefore in three stages.
See also chapter activating the automatic operation (release according to
the default in the programming level)
Other setting values in the display
programming level >initial operation
>Fan settings.
8.7 Activating the automatic
operation
The ventilation intensity, external running mode, the activation of the
time program, the back-up mode and night air can be set in the menu
settings
.
The display can be shown or hidden according to the set-
tings during the initial operation.
By pressing the key [
Enter
]
while the settings are marked, one of the display
below the electronic controller can be invoked. The display is in the display
list of the settings. With the Key [
Up
] or
Key [
Down
]
you can switch to the
display bellow.
3. During the automatic operation the ventilation intensity will be auto-
matically calculated. By selecting, the control type will be activated or
deactivated for operation of the fans. The used sensors for the auto-
matically modification of the ventilation intensity can be from the type
temperature, humidity, air quality VOC and CO
2
concentration. The
larger the current temperature deviation the more is ventilated. The
fans were operated therefore in three stages.
Other setting values in the display
programming level >initial operation >Fan set-
tings.
The automatic operation can be activated through an external switch or key
with adjustable operation time per program routine. The activation of the sig-
nal contact or signal input at the electronic controller is activated by the
choice or deactivated by deselection. If the weekly program is activated, the
configured times and set points were used. Other setting values in the dis-
play
Menu-Overview>time program. Standards issued by the manufacturer
are in the display program level >initial operation>comfort function.
Содержание H42 Series
Страница 2: ...2...
