Rosenberg H42 Series, Инструкция по эксплуатации

Страница: 29 / 51

29
Info display constant analog Outputs
to be found at
Menu-Overview > Sta-
tus I/O
In a general displaying the status of the constant control output (analog) can
be shown. The assignment of the function accord with the circuit diagrams
Further display with text for the purpose of assignment signal input
and function can be shown through switching / scroll
8.14 USB- Port for Software
Update
In delivery condition the current and checked Software version of the Su-
praBox COMFORT (SBC) is loaded in the electronic control. In case of expan-
sion of the program routine with new functions you can via USB port ex-
change the software with the program routine.
Image: Top view electrical control
After transfer of software with the program routine the USB stick must be re-
moved.
In accordance with Rosenberg Ventilatoren GmbH the transfer of the software
with the program routine can be made via e-mail. This is a significant time-
saving for service, repair and exchange of electrical control.
Unzip the received compressed file on a USB stick.
Hint:
Directly on top of the drive the file AUTORUN can be found after this command is executed correctly.
In the directory TEST on the drive you can find the 8 necessary program files.
The structure must be adhered for the further procedure.
One of the eight program files contains the default values. The Controller can be moved by copy to the delivery
state.
1.
The electric control must be connected to the supply voltage. Switch of previously the loads.
2. Insert the USB-Stick in the USB- port, when the controller is started. Confirm with the key [ENTER], when
the corresponding display appears (USB- device detected).
…. Wait for other display. This procedure takes up to 2 minutes.