17
The display of the room-/return temperature in °C is made upon selection or
setting of the control temperature for the Temperature-Set point:
The selection takes place in the
programming level > initial operation > Temperature control
The current measurement of the sensor will be automatically displayed and updated.
8.6 Setting of the Fan intensity
The ventilation intensity can be set in the menu
settings
. The display can be shown or
hidden according to the settings during the initial operation. The entries are manual set
point standards for the supply air and the return air fan.
Speed set point setting scaled in %
to find at Display
Menu-overview >
Settings
Speed set point setting scaled in Pa
to find at Display
Menu-Overview >
Settings
Speed set point setting scaled in m
3
/h
to find at Display
Menu-Overview >
Settings
By pressing the key [
Enter
] while setting is marked the display for air volume
or ventilation intensity on the electronic control can be seen. The display is in
the display list of the settings. With the key [
Up
] or the key [
Down
] you can
switch to the display bellow.
The display of the setting for the fan operation can be chosen with the de-
faults
programming level > Initial operation> Fan setting
Key [
Up
]
Arrow key „up“
Key [
Down
]
Arrow key „down“
In the display changes or increase/reduce of the parameter value:
Содержание H42 Series
Страница 2: ...2...
