Rosenberg H42 Series, Инструкция по эксплуатации

Страница: 28 / 51

28
8.13 Real value display (Status
I/O)
Info display No.1 to be found at Menu-
Overview > Status I/O
By pressing the key [
Enter ]
while the Status I/O is marked, the display can
be opened.
In the display, the current value of the temperature is shown. The return air
and the temperature on the return heating register can be selected during
the start up.
The shown set point is the calculated set point from the manual set point
entry of the time program and the winter/summer compensation.
In the menu status I/O information about the plant condition is shown.
The display to the In-and Output (measured values, switching signal
and corrective signal) were shown or hidden in accordance with the
settings during the start up.
Key [
Up
]
Key arrow „up“
key [
Down ]
key arrow „down“
Changing between different active alarms
Switching to the previous display
Switching to the below display.
Info display Digital output to be found
at
Menu-Overview > Status I/O
In a general displaying the status of the signal input can be displayed. The
assignment of the function accord with the circuit diagrams.
Further display with text for the purpose of assignment signal input
and function can be shown through switching / scroll.
Info display Digital output to be found
at
Menu-Overview > Status I/O
In a general displaying the status of the signal input can be displayed. The
assignment of the function accord with the circuit diagrams
Further display with text for the purpose of assignment signal input
and function can be shown through switching / scroll