Rosemount 5600 Series, Справочное руководство

Страница: 194 / 210

Reference Manual
00809-0100-4025, Rev BA
April 2002
Rosemount 5600 Series
C-6
F
OUNDATION
Fieldbus
Diagnostics Device
Errors
In addition to the BLOCK_ERR and XD_ERROR parameters, more detailed
information on the measurement status can be obtained via
DIAGN_DEV_ERR. Table C-10 on page C-6 lists the potential errors and the
possible corrective actions for the given values. The corrective actions are in
order of increasing system level compromises. The first step should always
be to reset the transmitter and then if the error persists, try to the steps in
Table C-10. Start with the first corrective action and then try the second.
Table C-10. Device Errors
Diagnostics
Table C-11. Temperature sensor
type
Bit Number
Value of
DIAGN_DEV_ERR Description Corrective Actions
0 0 No alarm active See page 6-1
1 0x00000001 Reserved See page 6-1
2 0x00000002 FF card to transmitter comm fault See page 6-1
3 0x00000004 Level Measurement Failure See page 6-1
4 0x00000008 Temperature Measurement Failure See page 6-1
5 0x00000010 Volume Measurement Failure See page 6-1
6 0x00000020 Invalid ATP See page 6-1
7 0x00000040 No surface echo See page 6-1
8 0x00000080 Tank signal clip warning See page 6-1
9 0x00000100 Empty Tank See page 6-1
10 0x00000200 Full Tank See page 6-1
11 0x00000400 Conf. Reg. Pwd. Enabled See page 6-1
12 0x00000800 DB Error See page 6-1
13 0x00001000 Microwave unit error See page 6-1
14 0x00002000 Display error See page 6-1
15 0x00004000 Analog out error See page 6-1
16 0x00008000 Other HW error See page 6-1
17 0x00010000 Configuration error See page 6-1
18 0x00020000 SW error See page 6-1
19 0x00040000 DB Warning See page 6-1
20 0x00080000 Microwave unit Warning See page 6-1
21 0x00100000 Display Warning See page 6-1
22 0x00200000 Analog out Warning See page 6-1
23 0x00400000 Other HW Warning See page 6-1
24 0x00800000 Configuration Warning See page 6-1
25 0x01000000 SW Warning See page 6-1
Value TEMP_CONV_METHOD Description
0 User defined linearization table
1 User defined formula
2 DIN PT 100
3 CU90