background image

SXMLCR72

 

-

 Satellite Radio Compact Motorcycle Kit

 

Installa on Instruc ons

 

Pixel Technologies, Inc. | www.pixelsatradio.com | [email protected] | (800) 595

-

0845 | Page 1

 

Package Includes

 

(1) SiriusXM™ PowerConnect™ Vehicle Cradle

 

(1) SiriusXM™ 5 Volt Hardwired Power Adapter

 

(1) Handlebar Clamp Mount

 

(1) RAM Ball Mount Adapter (25 MM)

 

(1) Weatherproof Protec ve Case

 

(1) SiriusXM™ Antenna

 

(1) Auxiliary Cable

 

(1) L

-

Bracket with AMPS Plate & Lock Ring

 

(1) AMPS Plate (Male Dual Notch) with Screws

 

Loosen this screw

 

Loosen this screw

 

Rubber inserted here

 

Step 1 

-

 Install Clamp Mount

 

Before ge ng started, it is important to select an installa on loca on for the protec ve case with receiver. 

 

A er selec ng the installa on loca on for the protec ve case, loosen the two screws on the handlebar clamp mount 
all the way out and separate it from the back side of the clamp mount. Place the clamp mount on the handlebars, line 
up the screw holes and  ghten the screws to mount the clamp. Use the supplied rubber strips to increase the grip of 
the mount.

 

Содержание SXMLCR72

Страница 1: ...AMPS Plate Lock Ring 1 AMPS Plate Male Dual Notch with Screws Loosen this screw Loosen this screw Rubber inserted here Step 1 Install Clamp Mount Before ge ng started it is important to select an installa on loca on for the protec ve case with receiver A er selec ng the installa on loca on for the protec ve case loosen the two screws on the handlebar clamp mount all the way out and separate it fro...

Страница 2: ...o fit your installa on needs Next slide the L bracket assembly onto the back of the protec ve case The case should slide down over the dual notches Op onal RAM Mount Assembly To install the kit onto a RAM mount use the RAM Mount Adapter Plate located in the supplied parts bag Screw the RAM Mount Adapter Plate to the L bracket with the Dual Male AMPS Plate on one side and the RAM Mount Adapter Plate...

Страница 3: ...p 4 Connect Audio Included in the kit is an auxiliary cable for audio Connect the auxiliary cable to the aux input on the motorcycle sound system headset or other audio system Run the auxiliary cable to the loca on of the mount and leave the cable loose Step 4 Connect Power Included in the package is a hardwired power adapter Find a power source on the motorcycle either in a fuse box or an auxilia...

Страница 4: ...ase a cable is pulled If there is extra antenna wire it is recommended to wrap up the excess antenna wire inside the protec ve case Next connect each cable to the corresponding port on the dock Some docks may have the connec ons on the sides and not the back as shown in the figure to the right Note If installing a Bluetooth SiriusXM Dock only power and antenna are required The FM port on the dock i...

Отзывы: